(Image: http://media1.picsearch.com/is?xTge2l_hOUQISL4oYzOr93ETXvxZ4V-rGJTSYR1cqGI&height=224) Check the fluid level, low stage might point out a transmission leak. Look on the fluid very carefully. It helps to drip the fluid on a white paper towel to be able to see fluid condition. The fluid on the paper towel should be clear and transparent, without any metal filings or black flakes.

Supercharging by far has the most visual impact of any high performance modification. There are some basic concepts that should be understood in order to attain the very best results for a given utility. One in every of the basics is that you have an outlined finish lead to thoughts before you start.

For top-torque and high-horsepower functions, the timing pulley advantage goes to the steel pulleys. They provide vital variations in tensile energy and size options, however that is where the benefits end. While the time period 'plastic' is used to explain a class of timing pulley supplies, it is actually glass stuffed nylon that's the focus of this article.

Nylon is rather less then 2.5 occasions lighter (g/cc) than aluminum when comparing strong shapes. But, in the case of properly designed timing pulleys, nylon could be as a lot as five occasions lighter than aluminum, but capable of achieving the identical torque and velocity requirements. How is that possible? Just as nearly all of aluminum automobile wheels have four to six spokes to save lots of cost and weight with out compromising energy, balance or efficiency, the same rules apply relating to designing and Boosted Board Belts molding nylon pulleys.

Synchronous drives characterize a fashionable and efficient system of energy transmission. They essentially combine the benefits of mechanical components (gears & chain) and versatile components (flat & V-belts) while eliminating the inherent disadvantages of those parts. The main elements of a synchronous drive are the tensile cords, the teeth, rubber backing and tooth dealing with. Steel was originally used as a tensile cord material. Most belts as we speak use high modulus (low-stretch) fiberglass or aramid fiber because the tensile member.