Timing belts and timing drive tapes are designed to function with specialized timing pulleys to ensure exact, cyclical transport of products. Conveyor Twin Power Belts manufactured for timing functions may be made with perforations to engage timing teeth on the pulley; they may also be made with attachments that have interaction pockets within the pulley’s outer circumference. The timing components in both case are used just for timing and not motion era. The belt motion remains to be generated by frictional forces between the belt and pulley surfaces. The workforce at Belt Technologies has the information and experience to create customized timing belt options for just about any automated conveyor belt software.

Tensile cord is the load bearing ingredient of the synchronous belt. The belt teeth are molded of a hard rubber compound jacketed with a tricky, abrasion resistant nylon tooth going through. The compressive and shear strength of the teeth exceeds that of the tensile cords when there are at least six teeth in mesh with the driver pulley.

For example, high mechanical drive effectivity and vitality savings are required. Compact drive layout is necessary. Low maintenance is required or low noise is required. All synchronous belts operate on the positive engagement precept. Chains operate on the same precept but synchronous belts have many superior traits. The latter wrap around the pulley by way of flexion and never by rotation of articulated parts which eliminates one of many causes of put on and noise. With them, the required take-up allowances for tensioning are considerably much less. Synchronous belts have no hidden prices. They have larger availability of ratios and lengths.